丝印自干金属油墨

名　 称:FMPL丝印自干金属油墨油墨 编　 号：00090801 适用范围： 主要用于金属表面、白铁表面、不锈钢表面、玻璃表面、UV表面、强化表面、电镀表面等材料上，具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 -------------------------------------------------------------------------------- 免烘烤自干金属系列油墨 油墨特性： 拥有高光高色泽，主要用于金属表面、白铁表面、不锈钢表面、玻璃表面、UV表面、强化表面、电镀表面等材料上，具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷：丝印移印均可。 表干及实干时间：表干时间自然挥发5-10分钟；实干时间在24小时以内(加**固化剂)。 稀释及清洗：SV3慢干开油水、UVK1（移印开油水）同时可使用718洗网水清洗。 测试方法（完全干燥后）： 1、3m胶纸粘在画有百格的油墨表面，45度角迅速拉起不脱油; 2、纯度99%的工业酒精，一千克砝码用棉布包住在油墨表面，以水平力来回拉200次无脱色; 3、 耐磨：橡皮擦500g力水平来回擦500次。 使用方法： 1、使用前应充分搅拌，用后随时封闭； 2、搅拌时加开油水10-15%，稀释到印刷粘度如需自干加**固化剂5%-10%. 3、网板塞网时可用洗网水清洗； 4、不得与其它类型油墨混合使用。 注意事项： 1、塑胶材料的外观相似，但可能会是不同的材料，客户需试印确定其符合要求后，再批量印刷； 2、在移印过程中，如出现拉丝或散开，可适当加入一些慢干膏即可; 3、环境温度过高，将会影响油墨原有质量； 4、根据气候变化，请远离火源，阴暗环境下存放。Name: FMPL dry metal ink number: 00090801 scope: mainly used for metal surface, tin surface, stainless steel surface, glass surface, UV surface, surface strengthening, plating and other materials, with a high color, high color, high hiding power, high alcohol and wear resistance, high stability. -------------------------------------------------------------------------------- Free Baking dry metal series ink characteristics: high light color, mainly used for metal surface, tin surface, stainless steel surface, glass surface, UV surface, surface strengthening, plating and other materials, with a high color, high color, high hiding power, high alcohol and wear resistance, high stability. Printing: silk screen printing can be. Table dry and hard time: table dry time natural evaporation 5-10 minutes; hard work time in 24 hours (plus special curing agent). Dilution and cleaning: SV3 slow dry open oil and water, UVK1 (printing open water) at the same time can be used to wash the 718 net water cleaning. Test method (completely dry): 1, 3M gummed paper with ink surface adhesion in the painting, the 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, use cloth bags in the surface of the ink one kilogram of weight, with a horizontal force pulling back and forth 200 times without decolorization; 3, wear-resistant rubber eraser 500g force level wipe 500 times back and forth. Method of use: 1, before use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, printing viscosity for dry 5%-10%. plus special curing agent 3, the plug is used when washing network water cleaning to dilution; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry paste; 3, the ambient temperature is too high, will affect the the quality of the original ink; 4, according to climate change, please stay away from fire, stored in a dark environment.