1、油墨特性:慢干,高光泽,附着力优异,颜色鲜艳。 2、适用材料:各种喷过UV光油的工件表面,某些电镀,五金件。 3、技术参数: 粘度:15000—3000CPS; 光泽:白色 50°、黑色、80° 、彩色 80°; 过网性:77T—180T 自干测试时间:48小时,烘干80摄氏度— 100摄氏度,烤半小时;放置24小时测试。 耐酒精:99%酒精1000g力来回**过不去35次(较少); 耐磨:1000g力来回**过25次(较少); 耐纸带:200g力来回35次(较少)。 4、稀释剂的选择: a.S—3慢干开油水,S—3A快干开油水 b.洗网水—718洗网 5、注意事项: a.使用前将油墨与固化剂搅拌均匀,用后随时封闭; b.根据需要须添加15%—20%固化剂(DUV-01) c.施工件在施工前清除表面油渍及污物; d.需多色套印时应等前面的颜色表干后进行套色; e.在作测试时应先让墨层完全干燥 ; f.未经许可,不得将油墨与其它油墨混合及配色。 6、应急处理措施: a.如浸溅到眼部立即清水清洗,严重者就医。 b. 灭火急救措施:用干粉,泡沫灭火器或沙子灭火。 ※备注:由于材料及使用中的变数,可能是结果会有变化,以上数据仅供参考,使用前请自行测试。1, ink characteristics: slow dry, high gloss, excellent adhesion, bright colors. 2, applicable materials: all kinds of sprayed UV light oil workpiece surface, some plating, metal parts. 3, technical parameters: Viscosity: 15000 - 3000CPS; Gloss: white 50 degrees, black, 80 degrees, color 80 degrees; Over the net: 77T - 180T Since the dry test time: 48 hours, drying at 80 degrees Celsius - 100 degrees Celsius, bake for half an hour; placed for 24 hours test. Resistant to alcohol: 99% alcohol 1000g force back and forth more than do not go to the least (35); Abrasion resistance: 1000g force back and forth more than 25 times (at least); Resistant tape: 200g force back and forth 35 times (at least). 4, diluent selection: A.S - 3 slow dry open water, S - 3A - Open Water B. wash net water - 718 washing nets 5, matters needing attention: A. before using the ink and curing agent mixing evenly, after use at any time to close; B. add 15% - 20% curing agent (DUV-01) as required C. construction in construction before the removal of surface grease and dirt; D. should wait in front of the multi-color color table dry after topping; E. should make the ink layer completely dry before testing; F. without permission, shall not be mixed with other ink ink and color matching. 6, emergency treatment measures: A., such as splash into the eyes immediately clean water, serious medical treatment. B. fire fighting first aid measures: dry powder, foam extinguisher or sand fire. Please note: due to the material and the use of variables that may be the result of a change, the above data for reference only, please test before use.