产品说明: 此产品为单液型硅胶丝印油墨,与硅胶有良好的粘接性,适用于硅胶基材表面各种颜色的丝印。主要优点: 环保 较佳的附着力 优异的色泽效果 保存方式: 未开包装,储存于0℃-5℃,使用寿命为6个月。包装方式: 1KG/罐 使用方法: 1、油墨从冰箱取出后,加入适量的无味煤油进行稀释搅拌。2、待油墨完全搅拌均匀后,即可倒入网板上,将油墨丝印于基材上。3、A、立式烤箱,180℃-200℃,进行加硫20-25分钟即可固化。B、卧式烤箱,220℃-240℃进行6-8分钟即可固化。注意事项: 1、保持良好的操作环境,注意通风,避免接触火种与高温物品。2、使用后剩余的油墨不宜倒回原包装内共同储存。3、保持室内温度和环境,丝印油墨不宜长时间放置网板上。以免油墨暴露在高温下易引发油墨基体加速固化及空气中的尘埃吸附于油墨Product Description: This product is a single liquid silicone screen printing ink, and silica gel has good adhesion, suitable for silica gel substrate surface color screen. The main advantages: save the color effect of environmental protection and excellent adhesion excellent: unopened packaging, storage at 0 DEG -5 DEG, the service life is 6 months. Packing: 1KG/ tank use: 1, ink removed from the refrigerator, add the right amount of odorless kerosene diluted mixing. 2, ink completely after mixing evenly, then pour the oil on the screen, "printed on the substrate. 3, A, vertical oven, 180 degrees C -200 C, add sulfur 20-25 minutes to cure. B, horizontal oven, 220 degrees C -240 C for 6-8 minutes to cure. Note: 1, to maintain a good operating environment, pay attention to ventilation, avoid contact with fire and high temperature items. 2, the use of residual ink should not be stored together back to the original packaging. 3, to maintain indoor temperature and environment, screen printing ink should not be placed on the screen for a long time. In order to avoid ink exposure at high temperature is easy to cause the ink matrix to accelerate the curing and adsorption of dust in the air in ink